Job Connect

Main Objective:
The Fitter is responsible for fitting parts in sub-assembly and completing heat exchangers, while also gathering materials per job assignment and performing the necessary layout per prints.

Pay Classification:
D - $20.77
C - $22.53
B - $25.17
A - $28.20
In addition, there is an hourly shift differential of $.75 for all employees working the 2nd shift.

Full Benefits offered (medical, Dental, Vision).

Hours of operation are:
Monday – Friday
7 a.m. – 3:30 p.m. (1st shift)
3:30 p.m. – midnight (2nd shift)

Overtime hours when required would have 1st shift coming in at 5 a.m. and 2nd shift staying until 2 a.m.

Key Responsibilities and Expected Results:
Fit parts in sub-assembly and complete heat exchangers safely and per standards Review engineering drawings prior to all manufacturing operations
Gather materials per job assignment and perform the necessary layout per print Respectfully maintain effective working relations with coworkers at all times Complete work in a safe, productive. and efficient manner
Complete operator inspections Maintain clean and safe work areas
Participate in company-sponsored programs and initiatives including but not limited to S. 5S. Production Boards. Continuous improvement Team. Safety. etc.

Work in other areas of production as required
Notify supervision to determine when machinery needs to be placed out of service
Notify supervision to order machinery replacement parts. shop production consumables, supplies
Support and follow all rules. procedures and daily standard work as defined by the company miscellaneous supplies and safety

Complete projects or tasks assigned by the Area Manager, Area Supervisor, Operations Manager or General Manager

The foregoing is an outline of your key responsibilities and expected results. Due to changing circumstances and Sheco's desire to constantly improve systems and processes. you may be required to perform other duties deemed to be within your capacity.

PERSON SPECIFICATION
Education
High School Diploma or Equivalent

Experience
• Preferred 1-3 years experience in ASME Code Fabrication and/or equivalent experience
• Highly motivated. results-oriented and work on multiple projects
• Basic computer skills

Knowledge S Skills
• Basic understanding of heat exchanger terminology
• Fundamentals of manufacturing processes and safety
• Ability to work with and apply mathematical concepts
• Strong interpersonal and team communication skills
• Attention to Detail
• Problem Solving

PHYSICAL DEMANDS:
I have read, understand, and accept all the key responsibilities and expected result as outlined in the Job Description.
SHECO Class D Fitter Standard Work SOUTHERN HEAT EXCHANGER

General Requirements:
- Per Fitter Job Description.

In-Class Requirements:
- Learn to read and interpret drawing and welding procedure requirements under direct
supervision.
- Learning the various heat exchanger parts and TEMA types.
- Learning SHECO fitting standards with supervision.
- Learning process knowledge of fitting pressure and non-pressure carbon steel parts under direct supervision.
- Learning process knowledge of fitting pressure and non-pressure stainless steel parts under direct supervision.
- Learning the oxy-fuel process knowledge under direct supervision.
- Learning various hand tools used in heat exchanger fabrication under direct supervision.
- Learning the orientation and degrees measurements on drawings.
- Learning the utilization of leveling tools to accurately orientate various pressure-containing
parts.
Other duties as assigned by supervisor.

In-class Training Requirements:
-Demonstrate ability to read and interpret drawing and welding procedure requirements with supervision.
-Demonstrate understanding of SHECO fitting standards and procedures with supervision. -Demonstrate ability to perform fitting operations on pressure and non-pressure-containing equipment with supervision.
-Must pass lG ½" Carbon Steel ASME IX SMAW {309L) welding test.

Reports to:
Area Manager and/or Area Supervisor

Relationships to:
Internally Production Engineering Quality

Main Objective:
The Welder is responsible for completing all welding operations and sub-assembly parts and completing heat exchangers. while also demonstrating a good working ability to read prints to determine weld types, sizes, and information regarding the welding process.

Pay Classification:
D - $20.77
C - $22.53
B - $25.17
A - $28.20
In addition, there is an hourly shift differential of $.75 for all employees working the 2nd shift.

Full Benefits offered (medical, Dental, Vision).

Hours of operation are:
Monday – Friday
7 a.m. – 3:30 p.m. (1st shift)
3:30 p.m. – midnight (2nd shift)

Overtime hours when required would have 1st shift coming in at 5 a.m. and 2nd shift staying until 2 a.m.

Key Responsibill1ies and Expected Results:
Complete all welding on sub-assembly parts and complete heat exchangers to include grinding as needed Review engineering drawings prior to all manufacturing operations
Ability to read prints to determine weld types, sizes, and other information required for welding Respectfully maintain effective working relations with co-workers at all times
Complete work in a safe, productive. and efficient manner Maintain clean and safe work areas
Participate in company-sponsored programs and initiatives
Work in other areas of production as required
Notify supervision to determine when machinery needs to be placed out of service
Notify tool room attendant to order machinery replacement parts. shop production consumables, miscellaneous supplies, and safety supplies
Support and follow all rules. procedures and daily standard work as defined by the company
Complete projects or tasks assigned by the Area Manager. Area Supervisor, Operations Manager, or General Manager

Education Required:
High School Diploma or Equivalent

PERSON SPECIFICATION:

Experience
• Preferred 1-3 years experience in ASME Code fabrication and/or equivalent experience
• Highly motivated, results-oriented, and work on multiple projects
• Basic computer skills

Knowledge Skills
• Basic understanding of heat exchanger nomenclature
• Fundamentals of manufacturing processes, safety, and personnel management
• Ability to work with and apply mathematical concepts
• Strong interpersonal and team communication skills
• Attention to Detail
• Problem-solving

PHYSICAL DEMANDS:

Strength:
I. Lift and/or carry
a) 501b. Max.
b) I0-25 lb. Frequent
c) Lift Range- Floor to 66 inches
d) Commonly 36 inches

Position Tolerance:
I. Standing - Constant
2. Elevated work in standing - Occasional
3. Squatting - Occasional
4. Kneeling - Occasional
5. Lowered work in sitting - Occasional

Mobility/Repetitive Motion:
1. Walking - Frequent
2. Push/Pull
a) 25 lb. Max. 2. Lowered work - Frequent 2. Standing work - Frequent
2. Climbing - Frequent
3. Crawling - Occasional
4. Repetitive Squatting- Occasional
5. Repetitive Trunk Rotation - Occasional.
6. Stair Climbing - Occ11sional
7. Repetitive Reaching - Frequent

General Requirements:
- Per Welder Job Description.

In-Class Requirements:
- Entry-level D class welder to start FCAW on carbon steel non-pressure welding only, working his or her way to nozzle and spot radiography pressure-retaining welds.
During the probationary period, the welder shall pass the SHECO welder qualification PL-1 standard (2G carbon steel 7018).
- Once he or she has demonstrated proficiency in FCAW welding carbon steel non-pressure welds,
nozzle welds, and spot radiography pressure-retaining welds, he or she may take the SHECO
PL-3 qualification test (2G 309L SMAW).
- Upon acceptable PL-3 weld test results, he or she may begin SMAW/FCAW welding low-grade
stainless steel (304L) non-pressure, nozzle, and pressure-retaining spot radiography welds.
- Upon demonstrating the ability to proficiently weld stainless steel, he or she may weld 100%
radiography joints in carbon steel followed by welding 100% radiography joints in stainless steel.
- Other duties as assigned by supervisor.

In-class Testing Requirements:
• Must pass SHECO welder qualification test PL-1standard (2G Carbon Steel 7018).
• Must pass SHECO welder qualification test PL-3 standard (2G Carbon Steel 309L SMAW).

Reports to:
Area Manager and/or Area Supervisor

Relationships to:
Internally Production Engineering Duality

Main Objective:
The Machinist is responsible for operating turning equipment and basic machine tools. Machinists are also responsible for the layout and equipment set-up according to engineering drawings. work instructions and standards.

Pay Classification:
D - $20.77
C - $22.53
B - $25.17
A - $28.20
In addition, there is an hourly shift differential of $.75 for all employees working the 2nd shift.

Full Benefits offered (medical, Dental, Vision).

Hours of operation are:
Monday – Friday
7 a.m. – 3:30 p.m. (1st shift)
3:30 p.m. – midnight (2nd shift)

Overtime hours when required would have 1st shift coming in at 5 a.m. and 2nd shift staying until 2 a.m.

Externally Customers Inspectors

Key /Responsibilities and Expected Results -
Knowledge and skill set to operate turning and basic machine tools safely and per standards Review engineering drawings prior to all manufacturing operations
Ability to read prints to determine layout and equipment set-up according to prints Respectfully maintain effective working relations with co-workers at all times. Workin a safe, productive, and efficient manner
Complete operator inspections Maintain clean and safe work areas
Participate in company-sponsored programs and initiatives including but not limited to QS. SS, Production Boards. Continuous Improvement Team, Safety, etc.
Work in other areas of production as required
Notify supervision to determine when machinery needs to be placed out of service

Notify supervision to order more supplies, machinery replacement parts, shop production consumables, miscellaneous supplies, and safety

Support and follow all rules. procedures and daily standard work as defined by the company
Complete projects or tasks assigned by the area Manager, Area Supervisor, Operations Manager or General Manager

The foregoing is an outline of your key responsibilities and expected results. Oue to changing circumstances and Sheco's desire to constantly improve systems and processes. You may be required to perform other duties deemed to be within your capacity.

PERSON SPECIFICATION:
Education
High School Diploma or Equivalent
Experience
• MTT and/or CNC cerfications
• Highly motivated, results-oriented, and work on multiple projects
• Basic computer skills

Knowledge Skills
• Basic understanding of heat exchanger terminology
• Fundamentals of manufacturing processes and safety
• Ability to work with and apply mathematical concepts
• Strong interpersonal and team communication skills
• Attention to detail
• Problem Salving

PHYSICAL DEMANDS:
Strength
1. Lift and/or carry
a) 50 lb. Max.
b) 10-25 lb. Frequent
c) Lift Range -
Floor to 66 inches
Commonly 36 inches
2. Push/Pull
a) 25 lb. Max.

Position Tolerance
I. Standing/Walking - Constant
2. Lowered work standing - Frequent work
3. Elevated work in standing -Occasional
4. Squatting - Occasional
5. Kneeling- Occasional
6. Lowered work in sitting - Occasional
7. Seeing- Constant

Mobility/Repetitive Motion
1. Walking - Frequent
2. Climbing - Frequent
3. Crawling - Occasional
4. Repetitive Squatting - Occasional
5. Repetitive Trunk Rotation - Occasional
6. Stair Climbing - Occasional
7. Repetitive Reaching - Frequent

In-Class Requirements:
? Demonstrate ability to read and interpret drawings under direct supervision.
? Demonstrate the ability to learn the various heat exchanger parts and TEMA types.
? Demonstrate understanding and utilization of the various hand tools required for conventional measuring and machining under direct supervision.
? Only to work with conventional machine tooling.
? Other duties as assigned by supervisor.


General Requirements:
? Per Machinist Job Description.

In-Class Requirements:
? Able to read and interpret drawings with no supervision.
? Demonstrate knowledge of the various heat exchanger parts and TEMA types.
? Demonstrate understanding and utilization of the various hand tools required for conventional measuring and machining with no supervision or direction.
? Demonstrate ability to work with Radial Drill tooling to perform heat exchanger detail work
under direct supervision.
? Other duties as assigned by supervisor.

In-Class Requirements
- Demonstrate ability to read and interpret drawings under direct supervision.
- Demonstrate the ability to learn the various heat exchanger parts and TEMA types.
- Demonstrate understanding and utilization of the various hand tools required for conventional measuring and machining under direct supervision.
- Only to work with conventional machine tooling.
- Other duties as assigned by supervisor.

Reports to:
Area Manager and/or Area Supervisor

Relationships to:
Internally Production Engineering Quality

Job Responsibilities:
- Assists mechanic and skilled personnel
- Performing mechanical work and repairs on mobile equipment
- Procuring, and moving parts, material, equipment and necessary tools
- Operating hoist(s) during repairs
- Operate other mechanical equipment to load truck
- Operate powered tools to perform mechanical work and repairs
- Operate welding equipment to perform basic welding work
- Use oxy-acetylene torch equipment to perform light or medium cutting jobs
- Shoveling and clean-ups
- Storage and transport of used and/or damaged equipment to others areas
- Perform safety walk around inspection before shift
- Replace or assist other workers as needed or directed
- Maintain a good housekeeping of the equipment
- Adhere to all CEMEX, OSHA, and MSHA rules and regulations at all times and wear proper safety equipment while on plant grounds
- Meet or exceed company safety standards
- Perform other job responsibilities as assigned by management
Qualifications:
- High School Diploma or equivalent
Knowledge, Skills, and Abilities:
- Ability to carry out not only simple, but complex oral and written instructions and deal with problems from standardized situations and work experience
- Good mathematical skills, including basic math, fractions and conversions of four-five digit numbers and common units of measurement in both metric and decimal system
- Ability to read and understand English sufficiently to be able to read technical information contained in manuals, reports, and Ability to operate equipment in reverse using mirrors
- Lifting, carrying, pushing, pulling and/or moving of 50 pounds maximum, with frequent lifting and/or carrying objects weighing to 25 pounds
- Ability to communicate well with supervisors, welders, leadmen, other Mechanics, maintenance personnel, co-workers and outside contractors
- High level of attentiveness and physical coordination to perform the work activities safely and productively
Working Conditions:
- Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors
- Must wear protective equipment while at the location
Physical Requirements:
Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree
- Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects
- While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around heavy rolling equipment
- Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls

Job Summary:
An electrician performs all types of electrical jobs throughout assigned locations or region. Electrical jobs include maintenance and installation of equipment and machinery used in production and manufacturing. Must be able to make simple sketches, diagrams, drawings, etc.

Job Responsibilities:
- Perform electrical work and repairs on industrial/mining equipment
- Read and work from blueprints and drawings in the installation, repair, and maintenance of plant and quarry electric equipment with or without supervision
- Install, adjust and maintain all electrical equipment, gauges and instruments
- Troubleshoot, evaluate and coordinate electrical needs, repairs and modifications
- Ensure that manufacturer’s standards of repair and maintenance are performed on all equipment
- Repair and troubleshoot circuits, wiring, motors, starters, controllers, generators, switchboards, dynamotors, etc.
- Take motors apart, rewind, clean, paint, lubricate, and assemble.
- Make point and brush replacements and adjust commutator and slip rings.
- Perform other job responsibilities as assigned by management
Qualifications:
- 5 years electrical maintenance experience
- 3 years experience in aggregate, cement or heavy industrial operations preferred
- Power distribution experience or understanding up to 4,160 volts
- Programmable logic control and digital drive experience
High school graduate:
- Prefer associates degree or equivalent in electrical maintenance experience
- Able to read, write, and speak English
- Bilingual a plus
- 5 years electrical maintenance experience
- 3 years of experience in aggregate, cement or heavy industrial operations preferred
- Power distribution experience or understanding up to 4160 volts
- Programmable logic control PLC and digital drive experience
- High school graduate. Prefer Associates Degree or equivalent in electrical maintenance experience.
- Be able to read, write and speak English
Bilingual a plus
Knowledge, Skills, and Abilities:
- Computer literate and able to use existing systems and grow into company networked program of Word, Excel and PowerPoint. SAP experiences a plus
- Excellent communication skills and attention to details
- Strong analytical/problem solving skills
- Able to read and understand English sufficiently to be able to read technical information contained in manuals, reports and related instructions
- Able to develop, read and use mechanical, electrical and structural sketches, blue prints and drawings
- Electrical troubleshooting skills and experience with motor control circuits and relay logic
- Able to prioritize tasks and work as a team member, as well as individually
- Good mathematic/mechanical aptitude
Working Conditions:
- Continuous exposure to extreme heat, extreme cold, extreme noise and working outside
- Must wear all necessary protective equipment while at the location
- Must be able to work any shift or Schedule including nights, weekends, holidays and on-call
Job Progression:

- Electrician A will possess all necessary skills to repair all electrical, analyzers, and instrumentation equipment in the plant
- Electrician B will possess all necessary skills to repair all instrumentation and Analyzers in the plant with the expectation of developing Electrician A skill level over time.
Physical Requirements:
- Must be able to perform all job functions which include, but may not be limited to walking, sitting, lifting, pushing, pulling, turning, climbing to a significant degree, and/or pulling of controls
- Heavy Work: Exerting up to 50 pounds of force occasionally, and /or up to 20 pounds of force constantly to move objects
- While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around heavy rolling equipment
- Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree
- Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently and/or up to 10 pounds of force constantly to move objects
- Job involves sitting most of the time, but also involves walking or standing for brief periods of time
- While performing the duties of this job, the employee is regularly required to talk and hear, to communicate to employees/visitors.

Legal Notices
CEMEX is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates.



CEMEX will consider for employment qualified applicants with criminal histories in a manner consistent with all local, state and federal laws.



CEMEX is an E-Verify participating employer.



Arizona Smoke-Free Act. CEMEX complies with the State of Arizona’s Smoke-Free Act (Arizona Revised Statutes § 36-601.01). Smoking and/or the use of tobacco or related products is prohibited in and on CEMEX property as well as any building and/or vehicle owned or leased by CEMEX.



CEMEX offers both competitive pay and benefits. Benefits applicable to this position may include, but are not limited to, medical, dental, vision, 401(k), Paid Time Off, and Holiday Pay, as well as a comprehensive wellness program to help keep employees and their families healthy and well. You can learn more about CEMEX Benefits by visiting the CEMEX USA Benefits and Well-Being page. (https://www.cemexusa.com/careers/life-at-cemex/benefits-well-being).

Painter
- Pay: $12-14/hr depending on experience
- Automotive spray painting experience would be helpful but not necessary. Great opportunity to grow from apprentice to journeyman!
- High School diploma is not required.

ESSENTIAL FUNCTIONS:
- Receiving product for either the Fabrication or Letter departments, prepping the product for painting (Bondo, sanding, inspecting, masking)
- Helping the current painters paint the product.
- Inspect product after painting for mistakes.


NECESSARY KNOWLEDGE, SKILLS, AND ABILITIES.
- Must be able to:
Climb ladders,
Lift 75lbs,
Move product around
Think ahead
Pass a drug test
Be on time, stay late and work weekends when needed.

Position Overview: To ship, receive, and deliver supplies, materials and equipment and maintain inventory control and records; perform related work. Responsible for performing routine building maintenance tasks. Performance of building maintenance tasks in one or more fields(e.g. carpentry, electrical, heating, ventilation, HVAC, plumbing). Perform general cleaning and trash removal. Perform other tasks as assigned.

Shipping and Receiving Typical Duties:
- Receives and unloads freight both manually or with equipment such as forklifts and pallet jacks
- Checks for damaged goods; verifies quantity and quality of order
-Verifies items received with purchase order; wraps, packages, and ships supplies
- Delivers and retrieves supplies to and from work or storage areas
- Tags and issues supplies; stocks shelves and rotates inventory
- May receive, store, and ship flammable, explosive or caustic and hazardous material
- May assemble and move furniture; may maintain equipment and vehicles

Inventory Maintenance and Clerical Typical Duties:
- Participates in physical inventories of warehouse and/or supply yard
- Maintains inventory records by adding or deleting supplies as they are shipped or received
- Operates a personal computer to access, enter, and correct information
- Answers phones and provides information using customer service skills
- May prepare damage claims for supervisor's review and signature
- May coordinate disposal of surplus property and manage records retention

Essential Functions:
- Perform shipping and receiving duties
- Determines method of shipment, utilizing knowledge of shipping procedures, routes and rates
- Support the shipment of goods produced and the received goods and supplies to be used in or to aid in the production/storage of goods destined for sale to our customer base
- Responsible to make arrangements for pick-up by the carrier specified o the customers purchase order
- Must report defective materials or questionable conditions to the department supervisor
- Responsible for keeping adequate supply of shipping materials on hand at all times
- Maintain the work area and equipment in a clean and orderly conditions and help maintain clean and orderly work areas all over the shop
- Required to make pick-ups and deliveries to our suppliers or customers for parts and raw materials as well as our product utilizing a company vehicle
- General housekeeping, maintenance and organization of the dock and inventory areas.
- Unpacks and examines incoming shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages
- Inspects buildings and other structures to determine functional systems and detect malfunctions and needed repair making notes and recommendations when applicable
- Performs minor electrical maintenance using appropriate hand, power and specialty tools
- Performs minor plumbing maintenance
- Performs minor painting, carpentry and masonry work
- Prepares product for shipment using appropriate packing materials
- Ships product most efficient way possible and keeps record of shipping and freight charges
- Clean rooms, hallways, lobbies, break area, restrooms, corridors, stairways, parking lots and other work areas
- Performs other work related duties
- Works flexible hours
- Keeps up with recycling of plastics, metals, pallets and also calls to empty waste container
- Helps maintain all equipment and assists install crews with loading and unloading of trailers and vehicles

Plan, coordinate, implement and finalize projects according to specifications and deadlines, all while keeping the project within budget. Need to define the project’s objectives, create schedules and oversee quality control throughout the entire project by attaining resources and managing the team, as well as third-party contractors.

Roles and Responsibilities (include but are not limited to):
- Manage project internally from start to finish as outlined below:
-Develop, review, and manage design and drawing process
-Create a detailed work plan which identifies and sequences the activities
needed to successfully complete the project
-Determine the resources (time, money, equipment, etc) required to complete
the project
-Develop a schedule for project completion that effectively allocates the
resources to the activities
-Review the project schedule with management and all other staff that will be
affected by the project activities; revise the schedule as required
-Compile and manage submittal process
-Obtain Landlord/Tenant approvals
-Assist in obtaining permits for projects
-Manage Work Order entry
-Act as customer representative at KSI
-Develop, maintain, and communicate project schedules internally and with
the customer
-Onsite meeting with customers, architects, contractors, and crews as required
-Assist in additional sales on projects and overall marketing and customer
development
-Obtain quotes, submit Purchase Orders, schedule and manage
subcontractors
-Communicate in person, by phone and/or email with customers including
General Contractors
-Manage and Direct work on site to ensure proper and smooth work flow
-Attend Job site planning meetings with customers and GCs as well as punch
list meetings at close of job
-Review and close out finished work orders
-Complete and submit billings to accounting
-Manage punch list and customer complaints
-Identify, assess and minimize project risks until successful project completion
-Assist in securing economical hotel rooms for outside install crew members
- Position may require travel in the form of day trips as well as overnight
- Position requires insurability through company insurance for driving
- Work week from 45 to 60 hours depending on the number of projects
- Position requires self-starter: training will be given but applicants are expected to quickly take over and manage their own work
- Position requires computer skills including Microsoft Office, QuickBooks and professional letter writing abilities
- QuickBooks knowledge and construction experience is a plus.

This is a fast paced job in a very custom industry! Every day is something new! Position requires a motivated self starter who is able to learn quickly and work closely with other project managers to get the job done!

Prepares cost estimates by analyzing proposals and requirements. Will take into consideration all relevant factors in the plan such as materials, labor and equipment. As well as related expenses, including insurances, taxes and incidental costs due to delays. May also review bids offered by subcontractors in order to choose the most cost effective option.

Roles and Responsibilities Requited (but not limited to):
- Prepares work to be estimated by gathering proposals, blueprints, specifications, and related documents.
- Identifies labor, material and time requirements by studying proposals, blueprints, specifications, and related documents.
- Computes cost by analyzing labor, material and time requirements.
- Resolves discrepancies by collecting and analyzing information.
- Presents prepared estimate by assembling and displaying numerical and descriptive information.
- Prepares special reports by collecting, analyzing, and summarizing information and trends.
- Contributes to team effort by accomplishing related results as needed.

Applicants should:
- Be proficient using Excel
- Have good math & analytical skills
- Have some experience reading plans/drawings
- Be very detail oriented
- Have good organization skills

POSITION SUMMARY:
Supervises Fabrication department personnel in accomplishing duties related to manufacturing, repairing, inspecting and storing a variety of sign products. Stores inventories and accounts for materials, equipment and supplies. Operates a variety of computerized and mechanized tools and equipment. Organizes and maintains supplies, material and product storage areas. Coordinates activities of the department. Drives company non-commercial vehicles. Occasionally makes overnight trips. Reports to the Shop Foreman in Tuscaloosa, AL.

ESSENTIAL FUNCTIONS:
To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

GENERAL:
- Supervises work of Fabrication Department personnel.
- Directs and assists in the manufacture of product as specified in work order per production schedule.
- Ensures compliance with appropriate UL policy and practice.
- Coordinates with other departments to assure responsiveness and schedule compliance.
- Oversees the safe operation of all company equipment including: computerized performer machine and router, hydraulic brake, hydraulic shear, radial arm saw, welders, industrial lift truck, pallet jacks, hand jacks, dollies, overhead hoist, and other related equipment.
- Conducts routine periodic inventories to count and record stock items.
- Implements company quality assurance program.
- Implements company continuous improvement program.
- Trains new employees on department functions including safety, machine operation, forklift operation, plant procedures and company policy.
- Attends and participates in various scheduled and short notice meetings.
- Works five consecutive 8-hour days within normal business hours (7:30am-4:15pm)

SUPERVISORY:
- Coordinates production schedule with other department heads and shop foreman.
- Plans and develops work schedules and equipment usage schedules.
- Tracks and records material and labor.
- Develops and maintains close loops systems and procedures for all department activity.
- Explains company and department policies to department personnel, enforces safety regulations and adheres to codes and standards.
- Ensures all material and in process product is handled, stored, processed manufactured and staged in an efficient and effective manner.
- Maintains order and layout so that everything has a place and everything is in its place.
- Controls inventory levels, minimizes inventory on hand while at the same time eliminates downtime due to out of stock conditions.
- Executes and documents company established preventive maintenance inspection and service schedule for assigned equipment.
- Supervises/ensures the proper disposal of controlled waste product and material in accordance with applicable federal, state and local guidelines and requirements.
- Maintains appropriate records of waste disposition.
- Assists in personnel management activities including counseling and issue resolution.

OTHER RESPONSIBILITIES:
- Occasionally travels to visit other company facilities or customers.
- Maintains neat and well-organized workspace.
- Other duties assigned.

SUPERVISORY CHAIN:
This position reports to the Shop Foreman: supervises multiple direct reporting employees in Tuscaloosa, Alabama.

MINIMUM QUALIFICATIONS
Education and experience: Graduation from high school or GED, valid driver’s license. Four years experience with industrial sheet metal fabrication or electrical assembly systems desirable.

NECESSARY KNOWLEDGE, SKILLS, AND ABILITIES.
- Knowledge of industrial sheet metal fabrication and electrical assembly process and procedures.
- Knowledge of quality control systems and procedures.
- Ability to communicate effectively, verbally, and in writing.
- Ability to establish and maintain effective working relationships with other department heads, managers, employees, vendors and sub-contractors.
- Skill/ability to learn to operate the listed tools and equipment.
- Ability to read and understand work orders, spreadsheets, and other written instructions.
- Ability to understand and follow company policy and procedure.
- Ability and willingness to work as a part of a team.

PHYSICAL DEMANDS:
While performing the duties of this job, the employee is routinely required to stand for extended periods of time on concrete or gravel; talk and hear, use hands to manipulate tools, handle or feel objects, equipment, or controls; and reach with hands and arms. The employee is routinely required to walk and climb ladders. The employees must routinely lift and/or move objects up to 50 pounds and occasionally up to 100 pounds. Specific vision abilities required by this job include vision and ability to adjust focus.

WORK ENVIRONMENT:
Workspace is an industrial plant setting. The noise in the work environment is usually moderate but on occasion can be loud. The work environment includes a heated plant and warehouse as well as outdoors. The environment is often dusty and/or dirty.

POSITION PURPOSE
• To ensure that all parts are being verified and scanned in order to be placed in correct sequential slots

RESPONSIBILITIES
• Adherence to safety principles at all times
• Know and follow standard work procedures and safety rules for all tasks assigned
• Verify that all totes or containers are empty before placing verification sheet
• Verify that all containers are being staged in the location correctly
• Make visual quality checks of packaging

KNOWLEDGE AND SKILLS REQUIRED
• Good communication skills both written and verbal
• Ability to distinguish between colors

REQUIREMENTS
• Must be able to frequently walk around a warehouse floor
• Must be able to lift 50lbs on a frequent basis

PHYSICAL DEMANDS/WORK ENVIRONMENT
• This job operates in a warehouse environment.
• Noise level may be high
• The employee is frequently required to stand, walk, and sit for long periods of time. Bending and/or reaching may be required.
• Personal Protective Equipment must be worn at all times while on Shop Floor to prevent injury to self or others.

The Packer is responsible for packing the appropriate number of frozen corndogs in boxes using
proper equipment and procedures. This role works closely with the department supervisors, other
department leads and processing employees, in order to accomplish accuracy within the processing department and to ensure that our customers receive quality products.

The Packer is responsible for packing the appropriate number of frozen corndogs in boxes using
proper equipment and procedures. This role works closely with the department supervisors, other
department leads and processing employees, in order to accomplish accuracy within the processing department and to ensure that our customers receive quality products.

The Batter Mixer Machine Operator is responsible for mixing corn dog batter and operating pallet
jack to bring pallets of batter to production floor using proper equipment and procedures. This role works closely with the department supervisors, other department leads and processing employees, in order to accomplish accuracy within the processing department and to ensure that our customers receive quality products.

Duties and Responsibilities:
- Mix corndog batter by following proper mixing procedures to insure quality corndog
production
- Ensure work area is clean and orderly
- Don proper Personal Protective Equipment
- Help maintain and improve quality and food safety, to insure compliance with company
quality standards and USDA regulatory requirements
- Other duties, as assigned

Education and Experience Required:
- HS Diploma or GED Equivalent from an accredited institution
- Must be able to work weekends, holidays, and overtime, as needed

Requirements:
- Must be able to submit and pass a criminal background check
- Must be able to read and write
- Must have basic math skills
- Must wear required personal protective equipment and clothing
- Must follow company GMP and Food Safety procedures
- Must be able to follow proper mixing procedures
- Must be able to provide required information for daily batter forms (lot #’s,
temperatures, times, etc.)

Qualified applicants must be able to perform the following physical job requirements, with
or without reasonable accommodation:
- Must be able to stand for long periods of time on a wet concrete floor and stand in a cold
(40-48 degree) dusty environment
- Must be able to lift 50 pounds batter
- Must be able to operate a pallet jack and/or forklift and have required operator’s license

The Packer is responsible for packing the appropriate number of frozen corndogs in boxes using
proper equipment and procedures. This role works closely with the department supervisors, other
department leads and processing employees, in order to accomplish accuracy within the processing department and to ensure that our customers receive quality products.

Duties and Responsibilities:
- Repetitive reaching motions to place empty boxes in front of them at their workstation and
packing these boxes with the appropriate number of frozen corn dogs.
- Don proper Personal Protective Equipment
- Help maintain and improve quality and food safety, to insure compliance with company
quality standards and USDA regulatory requirements
- Other duties, as assigned

Education and Experience Required:
- HS Diploma or GED Equivalent from an accredited institution
- Must be able to work weekends, holidays, and overtime, as needed

Requirements:
- Must be able to submit and pass a criminal background check
- Must be able to read and write
- Must have basic math skills
- Must wear required personal protective equipment and clothing
- Must follow company GMP and Food Safety procedure
- Must follow company attendance policies and procedures

Qualified applicants must be able to perform the following physical job requirements, with
or without reasonable accommodation:
- Must be able to stand for long periods of time on a wet concrete floor and stand in a
cold (40-48 degree) environment
- Must be able to lift 20 pounds
- Must be able to pick up 3 corn dogs in each hand

Position Summary:
The fryer machine operator is responsible for preparing the set up/take down of corndog fryers to
meet daily production schedule. Responsible for maintaining fryers in an efficient-operating
manner. Responsible for maintaining oil level, supply sticks to machines and keep batter tank and
fryer clean while maintaining acceptable quality, productivity and safety standards. This role works
closely with the department supervisors, other department leads and processing employees, in
order to accomplish accuracy within the processing department and to ensure that our customers
receive quality products.

Duties and Responsibilities:
- Maintain fryers in an efficient-operating manner
- Maintain oil level, supply sticks to machines and keep corndog batter clean
- Prepare set up/take down of corndog fryers to meet daily production schedule
- Don proper Personal Protective Equipment
- Help maintain and improve quality and food safety, to ensure compliance with company
quality standards and USDA regulatory requirements
- Other duties, as assigned

Education and Experience Required:
- HS Diploma or GED Equivalent from an accredited institution
- Must be able to work weekends, holidays, and overtime, as needed

Requirements:
- Must be able to submit and pass a criminal background check
- Must be able to read and write
- Must have basic math skills
- Must wear required personal protective equipment and clothing
- Must follow company GMP and Food Safety procedure
- Must follow company attendance policies and procedures

Qualified applicants must be able to perform the following physical job requirements, with
or without reasonable accommodation:
- Must be able to stand for long periods of time on concrete floor in a warm
environment (60-80 degrees)

Position Summary:
Meat Hanger is responsible for hanging raw wieners onto an oven conveyor and ensuring proper
hanging conditions of wieners on rods using proper equipment and procedures. This role works
closely with the department supervisors, other department leads and processing employees, in
order to accomplish accuracy within the processing department and to ensure that our customers
receive quality products.

Duties and Responsibilities:
- Hang raw wieners onto an oven conveyor
- Ensure proper hanging conditions of wieners on rods
- Don proper Personal Protective Equipment
- Help maintain and improve quality and food safety, to insure compliance with company
quality standards and USDA regulatory requirements
- Must work in safe manner
- Other duties, as assigned

Education and Experience Required:
- HS Diploma or GED Equivalent from an accredited institution
- Must be able to work weekends, holidays, and overtime, as needed

Requirements:
- Must be able to submit and pass a criminal background check
- Must be able to read and write
- Must have basic math skills
- Must wear required personal protective equipment and clothing
- Must follow company GMP and Food Safety procedure
- Must follow company attendance policies and procedures

Qualified applicants must be able to perform the following physical job requirements, with
or without reasonable accommodation:
- Must be able to stand for long periods of time on a wet concrete floor and stand in a
cold (40-48 degree) damp/wet environment
- Must be able to lift 50 pound rod of wieners to a 5-foot height (2 rods/minute) and
place onto moving oven conveyor

Position Summary:
Forklift Operator is responsible for operating the forklift in loading, unloading and moving of
product throughout warehouse facility using proper equipment and procedures. This role works
closely with the department supervisors, other department leads and processing employees, in
order to accomplish accuracy within the processing department and to ensure that our customers
receive quality products.

Duties and Responsibilities:
- Operate forklift for transportation of product and materials
- As needed, makes minor adjustments to the forklift or notifies supervisor if forklift is not
working properly
- Don proper Personal Protective Equipment
- Help maintain and improve quality and food safety, to insure compliance with company
quality standards and USDA regulatory requirements
- Must work in safe manner
- Other duties, as assigned

Education and Experience Required:
- HS Diploma or GED Equivalent from an accredited institution
- Must be able to work weekends, holidays, and overtime, as needed

Requirements:
- Must be able to submit and pass a criminal background check
- Must be able to read and write
- Must have basic math skills
- Must wear required personal protective equipment and clothing
- Must possess a license to drive a forklift
- Must be able to work with minimal supervision
- Must follow company GMP and Food Safety procedure
- Must follow company attendance policies and procedures

? Qualified applicants must be able to perform the following physical job requirements, with
or without reasonable accommodation:
- Must be able to alternate sitting, standing, walking for 8-10 hours
- Must be able to perform repetitive foot motions, bending and forceful pulling
motion required

Company Description

Foster Farms has been serving families since 1939. Since the founding days, Foster Farms has always been committed to providing consumers with the highest-quality, best-tasting poultry products available. Our commitment to excellence, honesty, quality, service, and our valued TEAM Members will shine through in everything we do.

Foster Farms is always looking for talented individuals to join the Foster Farms TEAM. We offer the
experience of a large organization; however, operate like a family business. More than half of our job openings are filled by internal promotion, and we encourage TEAM Members to gain a variety of experiences across different functional groups.

Essential Job Functions

- Responsible for supervising all the production and sanitation activities through the various shift
leadspersons. Train, direct and motivate TEAM members to achieve department goals and stands on yield, quality, productivity and safety.  
- Responsible for his/her respective department and for meeting department goals and standards on quality, yield, productivity, cost and safety.
- Directly responsible for the development and training of TEAM members, working within the guidelines of the union contract and company policies.
- Directly responsible for monitoring standards and indexes needed to control area of responsibility.
- Responsible for quick and timely feedback to supervisor on all exception in regard to productivity, downtime, quality, yield, cost and safety. 
- Responsible for making sure all preventive maintenance is done on all equipment in area of control and interfacing with immediate Supervisor on all suggested changes that would make the job better, more profitable and safer.
- Directly responsible for giving safety orientations and holding safety/general meetings as required.

Qualifications

- Must have a B.S. or B.A. degree in Business Management or equivalent work experience.
- Must have a minimum of 3 years experience in the food processing industry.
- Must have demonstrated ability communicate verbally in writing and must have strong interpersonal skills.
- Must have a balanced technical/mechanical/human resource knowledge.
- Must be able to evaluate line TEAM members fairly and objectively.
- Must have the ability to interface on a daily basis with all support groups or departments.
- Bilingual in English/Spanish preferred.
- Must be able to submit and pass a criminal background check.

KNOWLEDGE, SKILLS, AND ABILITIES:
• Ability to read and write
1. Ability to pass medical screening and drug test (pre-employment, random, and annual)
2. Ability to perform duties in accordance with training and standard operating procedures.
3. Ability to physically control industrial hydroblasting and vacuum equipment.
4. Basic mechanical skill preferred.
5. Ability to work long hours (>8+ hours)
COMPETENCIES
• Understands verbal and written instructions
• Health and Safety
• Effective communication
MINIMUM REQUIREMENTS:
• 18 years or older
• High school diploma or equivalent preferred
• Physically capable of performing all duties and responsibilities assigned
• Able to travel
• Able to work weekends and holidays
• Industry related experience preferred
MACHINES, TOOLS, EQUIPMENT, AND SOFTWARE USED:
• Large industrial cleaning equipment and materials
• Large industrial vehicles
• Personal Protective Equipment
WORK ENVIRONMENT:
• Normal office environment (on-site and off-site locations), outside work
• Extreme temperatures
• Noisy conditions
• Exposed to weather
TYPICAL PHYSICAL DEMANDS:
• Works in atmospheres and locations with potential for exposure to various chemicals, some of which may be hazardous, toxic, or corrosive.
• Lifting and carrying of items weighing up to 50 lbs.
• Lifting 25 lbs. overhead ten to fifteen times per twelve-hour shift.
• Up to 50 lbs. overhead five to ten times per twelve-hour shift.
• Ability to climb ladders in heights of up to 250 feet.
• Exposure to extreme climate, including but not limited to sub-freezing and high temperatures up to 140 degrees.
ENVIROVAC OFFERS FULL EMPLOYEE BENEFITS:
• Medical, dental, vision, life, and accidental death insurance, short-term and long-term disability
• Income Protection
• Vacation
• 401k with generous match
• Career advancement opportunities
• Travel per diem and travel pay

PRIMARY DUTIES & RESPONSIBILITIES:
This list of duties and responsibilities is not all inclusive, and may be expanded to include other
duties and responsibilities as deemed necessary from time to time.
• Show commitment to perform all assigned duties safely, at all times.
• Meet physical requirement to be able to safely perform all duties of Hydroblast
Technicians.
• Will be trained to operate industrial vacuum trucks, high-pressure industrial water
blasters, and other necessary equipment.
• Will identify mechanical problems of assigned equipment and follow up
appropriately by performing minor mechanical repair and/or communicating
problems to supervisor for speedy repairs.
• Will safely and effectively perform decontamination process of assigned
equipment as required by project and company policy in order to prevent cross?
contamination between equipment and job sites.
PHYSICAL DEMANDS AND WORK ENVIRONMENT:
• Exposed to weather, including extreme temperatures.
• Work in atmospheres with the potential for exposure to various chemicals that may be
hazardous, toxic, or corrosive.
• Required to lift and carry items weighing up to 50 lbs.
• Ability to climb ladders to heights of up to 250 feet.
QUALIFICATIONS AND REQUIREMENTS:
• Education: High School Diploma or GED preferred.
• CDL Class A or B required.
• Hazmat and Tanker Endorsement preferred.
• Must be at least 21 years old.
• Physically capable of performing all duties and responsibilities assigned.
• Ability to work long hours, weekends, and holidays.
Pay range $18-$23 DOE. $2500 bonus paid out to CDL Operators after 90 days.

Requirements:
Trim the entire fish cutting sections according to specifications.
Use a filet knife to remove bone and jagged edges.
Cleaning, slicing, trimming and sectioning the fish for further processing.
Bag boxes and send to an operator.
Must be able to stand for extended periods of time.

Requirements:
Operate machines to clean, cut, process, and package fresh fish.
Pack product in boxes for storage and shipment.
Check product and packaging for quality issues.
Bag and freeze product.
Make sure machinery is set up properly.
Various other tasks including moving fish in and out of processing Departments.
Must be able to stand for extended periods of time.

Description & Requirements
WestRock (NYSE :WRK) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to more fiber-based packaging forward.



Folder Gluer Operator





Payrate: $20.00 $24.00 (depending on experience and qualifying)



Summary:

The operator will be familiarized with all mechanical functions of gluing machines. The operator will also be familiarized with all mechanical functions of various styles of folding paper boxes and trays. In addition, the operator must be able to recognize faulty boxes, such as not cut or creased properly, printing is not in registration, printing is not clean and sharp, and not folded or glued properly. Finally, the operator must be able to maintain the basic operation of the above equipment. The operator must master the above as well as learn to completely make ready and place into the operation, all cutting, printing, and gluing machines. Any other duties as assigned by management.



Job Duties:

Understanding of setting up some make readies and operate some of the folder/gluer and Leary Glue and Detection system.
Learn and be able to navigate the plant floor data system.
Enter work orders into JD Edwards
Locates and loads proper stock in preparation for operation.
Prepares make-ready feeder, prefold, glue system, final fold, delivery, stacker and pack station and inspection system.
Operates folder/gluer in accordance with customer specifications and current standard operating procedures.
Ensures total quality of the job while in operation.
Maintains the machine and area in accordance with the standard operation procedures.
Demonstrates competency in all basic and advanced folds; straight-line, lock-bottom, inner partition, and 5th panels.
Demonstrates competency in all paperwork.
Demonstrates competency in security label application, checkpoint, and sensomatic on folder/gluer respectively.
Assists press operators as needed at delivery end of press.
Assists the small machine operators in the rewind area.
Assists the operation of folders in the insert area.
Performs all other duties as assigned.


Requirements



Minimum of 3-5 years of experience operating a gluer. See essential and marginal functions below for more specific information.
Must be willing to work overtime as needed









WestRock is an Equal Opportunity Employer. We strive to create and maintain a diverse workforce where everyone feels valued, respected, and included. WestRock does not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other basis protected by federal, state or local law.

Description & Requirements
WestRock (NYSE :WRK) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to more fiber-based packaging forward.

WestRock in Eutaw, AL is looking for a Finishing Specialist. This role will act as a mentor and coach in our gluing department. This is a non-union role within our facility and pay is based on experience.







Summary

As the Finishing Specialist, you will be responsible for maximizing all aspects of the gluing department’s performance including Productivity, Quality, and preventative maintenance.



Essential Functions

Contributes to team effort by exhibiting strong work ethic and problem-solving skills.
Working with OEMs and the Department Lead to maximize the use of technology to improved quality and drive productivity.
Work with Training and Maintenance to develop effective preventative maintence programs on gluer, packers, robotic palletizers, etc.
Must be a subject matter expert (SME) in all basic folds: straight-line, lock-bottom, and 6 corner boxes.
SME in the use of the Leary gluing and inspection system. Leary IQ experience preferred.
Able to oversee machine make-ready to set it up to run production. Directs make-ready, pre-fold, glue system, final fold, delivery, stacker, bar code reader, pack station and inspection system.
Able to train operators to become proficient in Gluer and Leary Make-Readies. Also able to train operators in basic troubleshooting.
Assist the Quality Manager in developing improved Quality Standards (Copy checks, gluing and gluing detections checks, case label, line clearance, case pack) are being met.
Monitors machine efficiencies & speeds to ensure production levels meet or exceed standards & make appropriate adjustments.
Assists with monitoring setting up bar code scanners, glue detectors, jam sensors kick and ejection systems.
Able to trouble shoot and adjust necessary to ensure quality and conformity of package material.
Effectively communicates with management.
Assists in training new employees and operators on machines.
Able to work under minimal supervision.
Performs other job duties as assigned.




Qualifications

Education: High School Diploma or GED

Protective Equipment Required: Safety glasses, ear plugs, steel toe shoes, hair/beard net, gloves

Essential Knowledge: Strong Leadership and Communication skills. Mechanical aptitude.

Preferred Knowledge: 5+ years of folder/gluer operation or 5+ years experience and/or production lead.

General: Compliance with workplace rules, policies, and procedures, SQF, Safety, etc.


WestRock is an Equal Opportunity Employer. We strive to create and maintain a diverse workforce where everyone feels valued, respected, and included. WestRock does not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other basis protected by federal, state or local law.

Description & Requirements
WestRock (NYSE :WRK) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to more fiber-based packaging forward.

Production Leader- Finishing Department





Payrate: $30.00

Number of Openings: 4 (A shift, B shift, C shift, D shift)





Summary

As the Finishing Lead, you will be responsible for safely managing all aspects of the gluing department’s performance including productivity, quality, and preventative maintenance.



Essential Functions

Contributes to team effort by exhibiting strong work ethic and problem-solving skills.
Ensure SQF/food packaging safety compliance
Maintains safe and clean working environment by complying with company safety rules, procedures, and regulations.
Demonstrates competency in all basic folds: straight-line, lock-bottom
Demonstrates competency in the use of the Leary inspection system.
Able to perform machine make-ready to set it up to run production. Prepares make-ready, pre-fold, glue system, final fold, delivery, stacker, bar code reader, pack station and inspection system.
Operates machines in accordance with customer specifications and current standard operating procedures.
Performs quality checks according to established procedures to ensure all Quality Standards (Copy checks, gluing and gluing detections checks, case label, line clearance, case pack) are being met.
Monitors machine efficiencies & speeds to ensure production levels meet or exceed standards & make appropriate adjustments.
Sets up bar code scanners, glue detectors, jam sensors kick and ejection systems.
Able to trouble shoot and make adjustments necessary to ensure quality and conformity of package material.
Records and maintains Daily Management System reports at the end of shift
Effectively communicates with management.
Keep waste within company guidelines.
Assists in training of new employees and operators on machines
Able to work under minimal supervision
Performs other job duties as assigned.






Qualifications

5+ years of folder/gluer operation or 3-5 years' experience as production lead.
Mechanical aptitude



WestRock is an Equal Opportunity Employer. We strive to create and maintain a diverse workforce where everyone feels valued, respected, and included. WestRock does not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other basis protected by federal, state or local law.

Description & Requirements
WestRock (NYSE :WRK) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to more fiber-based packaging forward.

Career Opportunity: Join WestRock as a Production Supervisor with opportunities to advance and learn alongside accomplished leaders in the industry. As a Production Supervisor in WestRock’s Eutaw manufacturing facility, you will be responsible for the safe and efficient operations of converting production. In this role you will communicate performance expectations to shift workers, ensure production targets and metrics are met to achieve production demands, supervise machine productivity and quality, and manage personnel daily. You will work in a collaborative work environment and coordinate production operations and maintain effective quality procedures and safety regulations. You will be trained, mentored, and developed to succeed and further your WestRock career,



How you will impact WestRock:



Manage the day-to-day operations of the shift and ensure that all company standards and customer commitments (safety, quality, production, cost, on-time delivery) are met
Be a champion for change, drive results to bring the facility from Good to Great
Supervise daily production activities, including oversight of team members, and monitor performance levels of each team member
Lead and coach employees to meet the safety, quality, production, and all other key performance indicators of a fast-paced work team
Enforce plant safety regulations and encourage employees to become safety conscious
Build relationships with internal departments to produce a superior product, resulting in happy customers
Help build a world-class team, training your successor as you advance your WestRock career
Ensure all company safety policies and safe work practices are followed to ensure safety of self and others
Monitor and participate in Daily Management Systems (DMS) to track progress against production goals and enable performance excellence
Sustain productivity levels by properly staffing line production and equipment to meet customer demands and align any last-minute scheduling changes
Ensure SQF/food packaging safety compliance


What you need to succeed:



2+ years of supervisory experience in a manufacturing environment
Ability to be an on-shift resource for printing troubleshooting problems is highly desired
Knowledge of manufacturing processes, procedures, and machinery; folding carton or printing is a plus
Strong focus on Safety and Quality (SQF knowledge is a plus)
Experience in leading continuous improvement initiatives (Lean, Six Sigma)
High School Diploma or equivalent required; college degree is preferred
Proficient in Microsoft Office applications, specifically Excel and Word; ability to learn new software applications
Proven successful track record in managing, motivating and building teams


What We Offer:



Corporate culture based on integrity, respect, accountability and excellence
Comprehensive training with numerous learning and development opportunities
An attractive salary reflecting skills, competencies and potential
A generous benefits package starting on your first day of employment, including medical, dental, vision, disability, life insurance, 401k match, paid time off
A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work.

WestRock is an Equal Opportunity Employer. We strive to create and maintain a diverse workforce where everyone feels valued, respected, and included. WestRock does not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other basis protected by federal, state or local law.

Summary

The Finish Carpenter is responsible for analyzing shop drawings to fabricate custom woodworking products.


The focus of this job is on producing high quality, detailed work based on established standards, guidelines and procedures. Precise, consistent work output is essential requiring patience and a willingness to handle and complete one task at a time. The job environment is stable, based on known relationships with people and well-defined processes. Job knowledge and competency is built through structured step-by-step training and positive, supportive coaching from management and peers. Communication with others is based on knowledge of repetitive job routines and procedures gained from sufficient on the job experience. Consistent, error free work based on defined regulations and standards are key measures of job performance success. The job environment promotes steady, methodical work output so that job routines can be completed on time and error-free. This position is designed to develop a valued technical expert, who, recognized and supported by management and a stable work environment, can deliver quality work on a consistent basis.



Job Characteristics

Steady, even pace to promote accuracy and quality of work

Repetitive routines

Complete set of procedures and tasks completed before new ones are begun

Technical/analytical focus

Work within established systems, standards, and procedures

Communication based on job knowledge and expertise

Decision-making within clearly defined job scope

Based on defined policies and procedures

Supported by management

Focused on job knowledge and expertise

Helpful, supportive communication with management and peers

Collaborative approach in structured job environment

Leadership focused on consistent, accurate, quality work output

Supportive, non-threatening leadership style

Delegation to others when appropriate, using training, coaching and on the job experience



Job Duties & Responsibilities

Fabrication and final assembly of custom products (finished goods) within the woodworking industry.

Custom products and specific job duties & responsibilities to include but not limited to:

Finish Carpenter 1

Custom countertops

Custom plastic laminate items

Competent use of production tools & machinery

Requires supervision

Work productivity at average or below average pace

Finish Carpenter 2

Items included in Finish Carpenter 1

Custom desks (reception desks, nurse stations)

Custom benches, banquettes, etc.

Face frames

Other moderately complex custom woodworking products

Work productivity is average

Work quality is average

Finish Carpenter 3

Items included in Finish Carpenter 1 & 2

Advance knowledge of finish carpentry and custom woodwork assembly

Other complex custom woodworking products

High level of competency for custom work

Requires some supervision

Work productivity is above average

Work quality is above average

Finish Carpenter 4

Items included in Finish Carpenter 1, 2, & 3

Expert knowledge of finish carpentry and custom woodwork assembly

Advance and complex custom woodworking product

Requires minimal supervision

Work productivity is excellent

Work quality exceeds expectations

Individual is reliable and without attendance issues (Occurrences consistently remain below 6)

Keeps work area clean and free of debris

Keeps work area organized

Attention to detail is required



Education

High School diploma, GED, or higher is required

Relevant experience can be considered as an equivalent to a degree



Experience

Three or more years’ experience within the woodworking, manufacturing, or construction industry is preferred

Three or more years’ experience in Finish Carpentry is preferred



Computer Requirements

Time tracking software – Innergy

Shop drawing software – Innergy

Material requisition software – Innergy



Language & Mathematical Skills

Ability to effectively present information, questions, or discrepancies to Team Leader for resolution

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; mentally, hand-and-paper, and calculator.

About us: Benchmark is a local, family-owned manufacturing company that has been around for almost 50 years, and we are still growing! We pride ourselves on hiring and keeping good people. Our average employee tenure is 10+ years.

We offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee discount programs and retirement plan options.

We are currently seeking a full time Production Associate responsible for producing customer orders using various equipment and processes. The ideal candidate is detail oriented, able to multitask, possesses great time management skills, and has a strong work ethic.

Essential Functions:

Machine Operation

Load Proper Program and data to machine
Load product into equipment
Load proper tools
Follow proper procedure to produce product on manual machines and lathes
Background

Apply correct surface finishes using various methods.
System Check-in and Checkout

Receive product from inventory and scan into work system.
Send product to appropriate departments
Send finished product to inventory and scan out
Quality Control

Check product for any flaws in finish, design, and/or consistency
Maintenance and Scrap Control

Clean and oil machines
Fill coolant (sprayers) and way oil units on machines
Minimum/Essential Qualifications:

Education—High School Diploma or GED
Experience—2 years working in a production environment
Skill Sets— Good verbal and written communication, Ability to read and follow procedure cards, Basic computer skills, Ability to use digital calipers, Attention to detail
Other— Punctuality, consistent quality of work, positive attitude, eager to learn, safety conscious, efficient, accountable, honest and motivated
Preferred Qualifications:

Education—Technical certificate in Machine Technology
Experience—5 years experience in a production environment running CNC equipment
Job Type: Full-time

Pay: $15.00 - $17.00 per hour (DOE)

Benefits:

401(k) with 6% Employer Match
Health, Dental and Vision coverage options
Supplemental Short-term and Hospital Income policies available
Paid Time Off (PTO)
Employee Referral Program
Employee Discount Program
Heath & Wellness Programs - Gym Membership Reimbursement
Advancement Opportunities
This job description is not intended to be all-inclusive. Employee may perform other related duties as assigned to meet the ongoing needs of the organization.

Here at Benchmark we value diversity & belonging and are proud to be an Equal Employment Opportunity employer. All applicants are considered without regard to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, gender identity, sexual orientation, or any other legally protected characteristic, and are fairly and equitably compensated based on current market data. If you need assistance, or an accommodation, please let your Human Resources team know.

Equal Opportunity Employer/Females/Minorities/Veterans/Disability/Sexual Orientation/Gender Identity or Expression/Religion/Age

Pellet Mill Operator

Introduction

The Enviva team is driven by our shared vision for a renewable energy future. We are a fast-growing, purpose-driven, global energy company specializing in delivering sustainable wood bioenergy solutions. We are the world's largest producer of sustainable wood pellets, which provide a low-carbon alternative to fossil fuels.



Job Purpose

As a Pellet Mill Operator, you will operate and maintain several pellet mills, ensuring optimal feed rates, adjusting rolls/dies, and monitoring pellet quality to meet company standards; assist in conducting QC testing, troubleshoot equipment malfunctions, perform ash tests, and maintain a clean work environment.



Responsibilities

Analyze equipment performance and make necessary tooling and equipment changes to produce desired throughput and quality results

Perform and document required inspections of equipment and maintain equipment in good condition

Review work order specifications or instructions to determine materials, ingredients, procedures, extracting, forming, pressing and compacting materials to produce pellets.

Adjust machine components to regulate speed, pressure and temperatures of machine, amount, dimensions and flow of materials and ingredients.

Monitor machine operations and observes indicator lights and gauges, such as thermometers, voltage meters and timers to detect malfunctions.

Perform/coordinate maintenance on equipment per job instructions.

Perform/coordinate housekeeping to required standard.

Maintain consistent production quality to required standard.

Follow all workplace and job safety procedures.

Complete accurate reporting as required.

Communicate operational information as required.

Enter maintenance work requests as applicable.

Escalate issues promptly for proper resolution.

Required Qualifications

Must demonstrate mechanical aptitude.

Proficient in mathematics and measurements

Ability to read data and trends to make appropriate process adjustments.

Proven record in upholding safety standards.

Ability to understand and follow written and verbal job instructions



Preferred Qualifications - What Will Set Them Apart

High School Diploma or GED

At least two years of previous manufacturing experience.

Operation and Control - Controlling operations of equipment or systems.

Operations Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.

Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.

Troubleshooting - Determining causes of operating errors and deciding what to do about it.

Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.



Working Conditions

Must be able to work in environments that reach temperatures above 100 degrees and below 32 degrees.

Able to work in a hot, humid, cold and noisy industrial environment.

Able to maintain strict adherence to safety rules and regulations, to include wearing safety equipment.

Work at elevated heights and on slippery or uneven surfaces

Adapt to working within a team or alone, with minimal supervision



Physical Requirements

Able to perform tasks such as lifting, walking, climbing, stooping, standing, pushing, crawling. and/or pulling for up to twelve (12) hours a day.

Able to work around moving equipment and machinery.

Able to pull and lift up to 50 lbs.

Ability to safely and successfully perform the essential job functions consistent with the ADA.

Ability to climb a crane in excess of 100 feet high.

Ability to work from heights (at least 20 feet off the ground).

Able to climb vertical ladders (fixable or portable) at unbroken lengths of up to 20 feet.

Able to climb multiple flights of steps, angled ramps as needed.

Able to work on computer screen format for up to twelve (12) hours a day.

Able to walk construction sites at various stages of completion and weather conditions for up to twelve (12) hours a day.



Travel Requirements

This position may require travel from time-to-time, but not on a regular basis for training or other work-related assignments



EEO Statement

Automatically listed with job posting

Enviva is dedicated to the principles of equal employment opportunity (EEO) in any term, condition or privilege of employment. Enviva does not discriminate against applicants or employees on the basis of race, color, creed, religion, sex, national origin, age, physical or mental disability, ancestry, marital status, sexual orientation, gender identity or expression, veteran status, uniform service member, genetic information or any other status protected by law. Enviva complies with applicable state and local laws governing nondiscrimination in employment in every location in which we operate.

About the Company

Automatically listed below job posting



Enviva is the world’s largest producer of sustainable wood pellets, a renewable alternative to fossil fuels. We manufacture our wood pellets using sustainable practices while maintaining and improving the health of our forests and reducing greenhouse gas emissions on a lifecycle basis around the world. Our wood pellets are exported through our deep-water marine terminals to customers in the United Kingdom, the European Union, Japan, and beyond, helping to accelerate the energy transition and de-fossilize hard-to-abate sectors like steel, cement, lime, chemicals, and aviation fuels.

Enviva operates plants and ports in Alabama, Florida, Georgia, Mississippi, North Carolina, South Carolina, and Virginia, with corporate offices in four countries, employing more than 1,300 people around the globe. Together, we are dedicated to building a renewable energy future for generations to come.

Enviva’s mission is to displace fossil fuels, grow more trees, and fight climate change.

Peco Foods, Inc. is seeking multiple Poultry Processing Workers for both day and evening shift. Processing workers are responsible for ensuring wholesome poultry products are being produced in a safe and efficient manner. Shift hours/days will vary by department

Duties:
Comply with all company policies and procedures with regards to safety, quality, and all plant specific procedures and rules
Inspect all product for defects; both naturally and unnaturally occurring
Work at a safe pace necessary to maintain efficient production at all times
Kow and understand specifications/requirements for each product
Safely work with and around knives, scissors, and other equipment
Be familiar with and maintain compliance with all applicable departmental and facility job hazard analysis (JHA) and job safety analysis (JSA)
Be familiar with and maintain compliance of all food safety, HACCAP, and OSHA regulations
Work well with a team and independently
Must be available to wok overtime when necessary to meet production needs
Physical Demands:
Must be able to move (bend, stoop, climb stairs) within the department
Must be able to stand up to 100% of the scheduled shift
Demands include but not limited to gripping, lifting, cutting, and repetitive use of hands
Ability to properly wear personal protective equipment (PPE) as required by the company and job specific JHA
Ability to lift/maneuver up to 50lbs




Ability to work in extreme cold or hot temperatures
This description is not a comprehensive list of duties or responsibilities. Management may change or add duties and responsibilities at any time with or without notice.

Position Requirements:
No training, education or experience required
Urine Drug Test Required
Wages:
$15.40*/hour

Benefits:
Holidays, Vacation, Medical, Dental, Vision and Life Insurance

MACHINE OPERATOR FOR MACHINING AND FABRICATING JOB SHOP
Long time established, family-owned steel fabrication and machine shop is searching for experienced and motivated individuals with preferred experience in a Fab Shop or Machine Shop as a CNC Machinist. Experience programming is a plus! Machine shop specializes in repairing and making spare and replacement parts and equipment for the mineral processing industry. Lime and Cement plants are our primary customers.
++Looking for individuals with experience in running CNC lathes and milling centers with Fanuc controls.
++Must be able to accurately read measuring tools and some knowledge in reading drawings and applying standard shop practices, techniques and procedures.
++Experience with forklift, overhead cranes, and other shop equipment is a plus.
++Self motivator as well as ability to work in small groups to meet production needs.
++Day shift only minimum 40 hrs/week with opportunity for occasional overtime to meet schedule/workload.
Excellent Benefits:
**Blue Cross/Blue Shield medical.
**Dental and Vision Insurance available
**401k Retirement plan with company matching funds
**Paid vacation, paid holidays.
**Short term disability, life insurance. (Company pays half)
**Other benefits also available as voluntary. (Supplemental)
**Competitive pay
**Career opportunity for advancement
Please call or fax resume, or stop by and fill out an application.
Phone 205-665-4516 Fax 205-665-4518
Address: Central Machine: 250 Spring Drive Montevallo, AL 35115
Ask for Roy